Kawża analiżi u installazzjoni forma ta ' solenoid valv kojl enameled wajer maħruq

Hemm żewġ ewlenin raġunijiet għal il kojl ħruq ta ' solenoid valve:

1% 3a Il kojl temperatura huwa wisq għoli.

Hemm ilma fil-kolla.

Il- coil temperature is wisq għoli due to the following reasons:

1: The actual voltage fluctuation is too large, which exceeds the rated voltage range. The general voltage deviation of domestic enameled wire is 5%, and that of good manufacturer can reach 10%.

2: The medium in tiegħek solenoid valve may be foreign, stuck, the force of the solenoid coil cannot open the solenoid valve, li causes the solenoid valve, li causes the solenoid to work all the time. The coil is electrified and heated for a long time, and the temperature rises, and finalment the words burn down.

3: The starting power of the coil is not enough, li leads to the solenoid valve can not be opened, the coil is heated for a long time, and the temperature rises, li final causes the words to burn down.

4: Your PTC thermistor huwa miksur , li jikkawża il solenoid valv biex be out ta ' kontroll.

Għaliex do solenoids have to be installed horizontally? Can I installa it vertikalment?

Il solenoid valve huwa installat orizzontalment u il kojl huwa vertikali 'il fuq. Xi wħud prodotti jistgħu ikunu installati arbitrarjament, iżda it is aħjar biex tkun vertikali meta il- kundizzjonijiet permess biex tiżdied is-servizz ħajja.

Solenoid valve is most used for on and off in fluid environment, so it is directional and cannot be installed in reverse.

Fi ġenerali disinn, the solenoid valve should be installa horizontally, li is maprin considered from the service life. In the pneumatic environment, such design also reduces the effect of impurity plugging; In liquid environment, għax of the large current, the vertical or inclined electromagnetic valve is easy to be affected by impurities and affect affect normal operation. Barra minn hekk, il sticking u plugging of impuritajiet u il gravità ta ferromagnet huma kollha il fatturi li jistgħu faċilment jaffettwaw l-użu ta' solenojd valve.

Fi idrawliku sistema, għax ta ' il għoli kurrent , in ordni biex testendi il - ħajja ta' solenoid valve , relay huwa ġeneralment meħtieġ.